- Cold shrink in-line splice kit is designed for 600 vac rated armor power cables with aluminum or copper conductors
- The splice kit requires 2 roll of armor Cast structural material
- 2/0 AWG, 3/0 AWG, 4/0 AWG, 250 kcmil conductor size
- 1/case
- 3/0 AWG, 4/0 AWG, 2/0 AWG to 250 kcmil conductor size
3M 5733 Splice Kit
3M , 5733, Cold Shrink Low Voltage In-Line Splice Kit, Series: 5730, 1000 VAC, Armored Power/Non-Shielded Cable, 2/0 AWG to 250 kcmil Conductor, 1.15 to 3.3 in OD Insulation, 22 in Splice Length, 3 Conductors, Crimp Connector
Additional Description: 3M -5733 5733 3/C LV SPLICE KIT 7000031623
Catalog Description: These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Armorcast Structural Material. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V.3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 0.62–4.00 (16–10• mm). Notes:• Connectors are not included in the kit. Use only CSA certified compression connectors. Vinyl or nylon butt connectors are preferred for 5730 and 5731 series. • Amount of armorcast needed is based on two half-lapped layers and 15’ rolls.