Appleton 0ZGEYDM250 Conduit Sealing Fitting
Image Disclaimers Message
Appleton 0ZGEYDM250 Conduit Sealing Fitting
Appleton 0ZGEYDM250 Conduit Sealing Fitting
Part #:0ZGEYDM250
SKU #: 2320332
Key Features
Part #:0ZGEYDM250
SKU #: 2320332
Brand: Appleton
Dimensions: 7.5 in L x 3.38 in W
Finish: Tri-Coated
Size: 2-1/2 in
Suitable For Use With: IMC/Threaded Rigid Metal Conduit
Material: Malleable Iron
- Explosionproof, dust-ignition proof, raintight
- Smooth, rounded integral bushings in hubs protect conductor insulation
- Accurately tapped, tapered hub threads for tight, rigid joints and ground continuity
- Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
- Prevent passage of gases, vapors or flames from one portion of conduit system to another
- Required in class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
- Required in class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
- Required in class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
- Required in class I, Division 1 and 2 locations where two or more enclosures are connected by 36 or less conduit, seal must be located within 18 in of either enclosure
- Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in class I, Division 2 locations
- EYDM drain sealing fittings close radius type for sealing vertical conduit runs, access cover has drain valve for automatic draining of water accumulation above the seal
- EYDM vertical conduit drain seals for close turning radius (25% fill)
- Removable male nipple
- 2.69 in turning radius
- 1020.6 g Kwiko cement required
- Restrict any explosion to the sealed off enclosure, prevent pressure piling within conduit system
- Triple coat of zinc electroplate, chromate and epoxy powder coated finish
Appleton 0ZGEYDM250 Conduit Sealing Fitting
O-Z/Gedney Conduit Sealing Fitting, 2-1/2 in, For Use With: IMC/Threaded Rigid Metal Conduit, Malleable Iron, Tri-Coated, 7.5 in L x 3.38 in W
Additional Description: APLE-0ZGEYDM250 2-1/2 IN M/F SELAING FITTING
Catalog Description: Explosionproof Conduit Drain and Seal Fitting, Type Drain, Turning Radius 2-11/16 Inch, Trade Size 2-1/2 Inch, Connection Type Male, Female, Material Zinc Electroplated Chromate Epoxy Powder Coated Ductile/Malleable Iron, Mounting Position Vertical, Enclosure Class I Div 1 and 2 Group B C D, Class I Zone 1 and 2 Group IIA IIB, Class II Div 1 and 2 Group E F G, Class III, Approval UL 886, CSA C22.2, Overall Length 10-3/16 Inch, Application Seal Conduits in Vertical or Horizontal, to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames from One Portion of the Electrical System to Another Through the Conduit, Constructional Feature Explosionproof