Image Disclaimers Message
Crouse Hinds AFA20 EATON Conveyor Belt Alignment Switch
Part Number # AFA20
SKU # 2415208
$2052.21 / Each
$2708.92/Each
Crouse Hinds AFA20 Key Features
Brand: Crouse Hinds
Part Number # AFA20
SKU #2415208
Action: Snap
Actuator: Plunger
Amperage Rating: 15 A
Contact Configuration: 2NO
Dimensions: 11.84 in W x 5.68 in H
Enclosure: NEMA 3/4/IP66
Mounting: Surface
Series: AFA Series
Type: Explosionproof Replacement Double End
Voltage Rating: 600 VAC
Country of origin: AT
Material: Feraloy Iron Alloy
Manufacturer Name: Eaton
UNSPSC: 39122205
UPC: 00782274694795
$2052.21 / Each
$2708.92/Each
Crouse Hinds AFA20 EATON Conveyor Belt Alignment Switch
Brand: Crouse Hinds
Part Number: AFA20
EATON Crouse-Hinds Conveyor Belt Alignment Switch, Explosionproof Replacement Double End, Series: AFA Series, 600 VAC, 15 A, 2NO Contact Configuration, Snap Action, Plunger Actuator, NEMA 3/4/IP66 Enclosure, Surface Mounting, Feraloy® Iron Alloy, 11.84 in W x 5.68 in H Dimensions
Additional Description: CRHD-AFA20 AFA-BAS(JOY)-SWITCHES REPLACEMENT
Catalog Description: Eaton Crouse-Hinds series AFA conveyor belt alignment switch, 15A, Two normally open, Feraloy iron alloy, 600 Vac
AFA20 Application
Used in steel mills, mining, ore and coal handling operations, automotive, assembly lines, warehouses, loading docks, grain loading, handling, industrial facilities, factories facility, power distribution and controlAFA20 Item Features
- Finished with precision switches that provide normally open and normally closed contacts
- Housing consists of a center section which can be mounted either vertically or horizontally and a switch housing with an attached switch operating arm
- Enclosure has three 1 in conduit hubs, cast mounting lugs on 1-1/2 in center permit attachment to the web of a standard 3 in angle iron
- Operating arm has 3-1/2 in long stainless steel protective roller, approximately 3/4 in lateral movement of operating arm actuates switch
- Spring loaded operating arm will automatically return switch to normal position when belt interference is removed
- A severe conveyor belt run-off can rotate the operating arm counter clockwise up to 85 deg without damage to the switch mechanism
- Installation of AFA or AFAX unit on either side of a conveyor belt allows approximately 1 in or a pre-determined allowable belt misalignment before switch is actuated
- A typical installation would include a pair of AFA or AFAX units at each end of the conveyor belt where belt returns
AFA20 Standards
NEC Compliant|CEC Compliant|Class II, Division 1 Group E, F and G, Class II, Division 2 Group F and G, Class III|NEMA 9EFG|UL 698|CSA C22.2 25SKU #2415208Part Number #AFA20UNSPSC39122205UPC00782274694795