Image Disclaimers Message
LEVITON ODS15-IDI Decora Occupancy Sensor
Part Number # ODS15-IDI
SKU # 481990
$64.88 / Each
$98.83/Each
LEVITON ODS15-IDI Key Features
Brand: LEVITON
Part Number # ODS15-IDI
SKU #481990
Control Output: Manual On/Automatic Off
Dimensions: 46 in H x 1.75 in W x 1.83 in D
Lamp Type: Fluorescent/Incandescent
Power Rating: 100/280, 100/280 mW
Sensor Type: PIR
Temperature Rating (Degrees F): 0 to 50, 0 to 50 deg C
Time Delay: 30 s to 20 min
Type: 1-Pole Low-Profile Photocell Controlled Single Relay
Voltage Rating: 120/230/277, 120/230/277 VAC
Color: Ivory
Country of origin: CN
Mounting type: Wall
Manufacturer Name: Leviton
UNSPSC: 39122236
UPC: 00078477010235
$64.88 / Each
$98.83/Each
- Leviton Decora Occupancy Sensor, 1-Pole Low-Profile Photocell Controlled Single Relay, 120/230/277 VAC, 100/280 mW, PIR Sensor, 2100 sq-ft Coverage, 180 deg Viewing, 30 s to 20 min Delay, Fluorescent/Incandescent Lamp, 50/60 Hz Response, Manual On/Automatic Off Control Output, Wall Mount, 0 to 50 deg C, Ivory, 46 in H x 1.75 in W x 1.83 in D
ODS15-IDI Application
Small Offices, Heavier Loads, Private Restrooms, Lounges, Storage Areas, Classrooms, Conference Rooms and Commercial ApplicationsODS15-IDI Item Features
- Fits in standard wallbox and replaces 1-pole wall switch, ground connection required, gangable with other units
- Low profile design eliminates obtrusive scanning device look
- Convenient pushbutton provides manual ON/OFF light switching at any time
- Two dual element PIR sensors used to widen detection range, relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
- Segmented fresnel lens provides optimum sensitivity and performance designed with an extensive minor motion area where even slight body movements will be detected
- Vandal resistant PIR lens, 1-unit can be used for 120 to 277 VAC lighting, compatible with both electronic and magnetic ballasts
- Horizontal field-of-view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
- Manual ON/auto OFF mode for installations where manual ON switching is required but auto OFF switching is still desired for CEC title T24 energy savings
- To comply with T24, red LED indicator light flashes when sensor detects motion to verify detection is active
- Time delay in adapting mode, the time delay can be configured from 30 sec (test mode), 5, 10 and 20 min, in non-adapting mode, the delay can be configured from 5, 10, 20 and 30 min
- Light sensor adjustable ambient light override ranges from approximately 20 to 5000+ LUX to prevent lights from turning ON automatically during periods of ample natural light, increasing energy savings
- Light sensor enables the load hold OFF feature once level has been set, no neutral design is optional for retrofit applications
- Self-adjusting delayed OFF time interval compensates for real time occupancy patterns, preventing unnecessary ON/OFF switching
- Exclusive Walk-through feature provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy
- Vacancy confirmation when the time out expires and the relays turns OFF, a 30 sec vacancy confirmation exists to turn the relays back ON
- False detection circuitry
- Presentation mode feature for slide or film presentations allows pushbuttons to turn lights OFF and keep them OFF while the room is occupied
- Additional manual service switch provided for installer to force lights to hold OFF or hold-ON during installation
- Beep warn - unit beeps 3 times after delayed OFF time expires, then waits 10 sec before turning lights OFF
- Exclusive Leviton high inrush stability (HIS) circuitry, specifically designed to handle todays high inrush electronic ballast loads and offer unmatched durability and service
ODS15-IDI Standards
UL Listed|CSA 24|FCC Approve|NOM CertifiedSKU #481990Part Number #ODS15-IDIUNSPSC39122236UPC00078477010235