Schneider Electric LC1D80V7 Tesys D Iec Contactor
Image Disclaimers Message
Schneider Electric LC1D80V7 Tesys D Iec Contactor
Schneider Electric LC1D80V7 Tesys D Iec Contactor
Part #:LC1D80V7
SKU #: 2167685
Key Features
Part #:LC1D80V7
SKU #: 2167685
Brand: Schneider Electric
Coil Power Rating: 60, 60 hp
Coil Voltage: 400, 400 VAC
Contact Configuration: 3NO
Contact Rating: 80 A at 600 VAC
Dimensions: 3.35 in W x 5.12 in D x 5 in H
- Conforming to IEC 60947 rated impulse withstand voltage
- III overvoltage category
- 125 A at 140 deg F power circuit, 10 A at 140 deg F signaling circuit conventional free air thermal current
- 1100 A at 440 V power circuit conforming to IEC 60947/140 A AC signaling circuit conforming to IEC 60947-5 1/250 A DC signaling circuit conforming to IEC 60947-5 1 IRMS rated making capacity
- 1100 A at 440 V power circuit conforming to IEC 60947 rated breaking capacity
- 160 A gG at 690 V coordination type 2-power circuit, 200 A gG at 690 V coordination type 1 power circuit, 10 A gG signaling circuit conforming to IEC 60947-5-1 associated fuse rating
- 0.8 MOhm at 50 Hz, Ith 125 A power circuit average impedance
- 20 to 35 ms closing, 6 to 20 ms opening operating time
- 3600 cycles/hr at 140 deg F operating rate
- Without built-in suppressor module coil technology
- 245 VA at 68 deg F 50/60 Hz inrush power
- 26 VA at 68 deg F 60 Hz hold-in power consumption
- 6 to 10 W heat dissipation
- 25 to 400 Hz signaling circuit frequency
- 5 mA minimum switching current
- 17 VAC signaling circuit minimum switching voltage
- 1.5 ms on de-energization (between NC and NO contacts)/1.5 ms on energization (between NC and NO contacts) non-overlap time
- >10 MOhm signaling circuit insulation resistance
- TH protective treatment
- 3 degree of pollution
Schneider Electric LC1D80V7 Tesys D Iec Contactor
Schneider Electric TeSys D IEC Contactor, LC1D D-Line, 400 VAC Coil, 125 A Maximum Load Current, 60 hp Coil, 3 Pole, 50/60 Hz Frequency, 12.5/5.1 W Wattage, 3NO Contact Configuration, 1NO-1NC Auxiliary Contacts, 80 A at 600 VAC Contact, Screw Clamp Connection, Screw Clamp Terminal, Open Enclosure, 4000000 Cycles Operating Cycles, -23 to 140 deg F Operating, Surface Mounting, 3.35 in W x 5.12 in D x 5 in H Dimensions
Additional Description: SQD -LC1D80V7 (N) CONTACTOR OPTIONS NON-CANCELABLE, NON-RETURNABLE
Catalog Description: IEC contactor, TeSys Deca, nonreversing, 80A, 60HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 400VAC 50/60Hz coil, open